| FOR YOUR SUCCESS
  • Home
  • News
  • HG-Rm: the automated bending system for large scale parts - Amada Engineering Europe

HG-Rm: the automated bending system for large scale parts - Amada Engineering Europe

  • 27 October 2017

HG-Rm_foto interna news

The tour inside the AMADA Robot Technical Center is going to end…

After having analyzed the HG-1003ARs and the EG-6013AR, now we present the last bending automated system available inside RTC: the HG1303Rm.

Thanks to the HG1303Rm, complex rib parts and large scale panels can be automatically folded with high accuracy and speed.
The HG-Rm uses the high-end HG1303 press-brake which is integrated with a single 7-axis articulated robot and a series of intelligent devices that allow a reduction of setup and production time.

Main features:

1) SIMPLE OPERATION WITH A SINGLE ROBOT (7-AXIS ARTICULATED ROBOT)
A 7-axis articulated robot (six axes of motion plus one travel axis) can perform the whole bending cycle; loading, bending, repositioning, when necessary, and unloading.

2) EASY OPERATION BY INTELLIGENT CONTROL UNIT
Interactive operation by multi-touch; the complete cell can be controlled by a unique operator interface.

3) REGRIPPING DEVICE FOR PANEL
The automatic regripping for large panels is equipped with 2 motorized arms and automatic scissor supports.
The panel regripping is fully automatic, it doesn’t need any manual setup and it reduce robot motion and cycle time.

4) SECURE PRODUCTION BY SQUARING TABLE
The squaring table guarantees perfect part positioning after loading regardless of part shape or loading stack accuracy.

5) ACCURATE LOADING OF RIBBEN PARTS AND PANELS
Parts can be accurately picked up by the vacuum gripper; the double thickness detector ensures only single sheets are loaded.

6) REDUCED TRIAL BENDING AND RELIABLE PRODUCTION
2 axis Bi-S angle sensor (2nd axis is optional) guarantees high accuracy for the entire length of the part.

7) REGRIPPING DEVICE FOR RIB PARTS
An automatic regripping device, dedicated to rib parts, ensures high productivity even for complex shapes. It’s composed of an automated arm and clamp for minimal downtime. It can be used also as a sheet support when regripping at material pinch point.

8) REDUCED SETUP TIME AND EXPANTION OF THE BENDING RANGE
Thanks to the AGC (Automatic gripper changer) the gripper is automatically changed according to the part to be produced. A maximum of 4 grippers can be stored on 2 gripper parking station.

9) CAM
A 3D part is selected from the database then all the process steps (tool setup and bending sequence, robot grip position, UL strategy) are defined; all robot movements are automatically generated avoiding manual teaching operations. AR-CAM generates the press-brake and robot programs offline. The programmer can check the complete simulation of the bending cycle.

HG-Rm_immagine news x testo

AMADA team is always at your complete disposal, please contact your reference AMADA Sales Company to get further information.
We would be very glad to welcome you in the AMADA Robot Technical Center!

Would you like to get further information about the other Amada Bending Automation solutions?
Click here to get further information about EG-AR

All news
HEADQUARTERS:
Piacenza
  • Address: 1/3 Amada I.
    Pontenure (PC), 29010
  • Phone: +39 0523 952811
  • Fax: +39 0523 952899
 
Turin
  • Address: 15, Giovanni Agnelli
    Santena (TO), 10026
  • Phone: +39 011 7412749
  • Fax: +39 011 7412044
HOURS
  • Mon - Fri: 8.30 - 12.30
    13.30 - 17.30
  • Email: info@amada-engineering.eu



    Follow us:
    Amada Engineering Europe Srl | Company with Sole Shareholder | Registered office: 1/3 Amada I. - 29010 Pontenure (PC) | VAT n. 00844050336 | Reg. Impr. of Piacenza n. 00844050336 | REA n. 110682 Cap. Soc. i.v. Euro 905.000,00 |Company subject to Management and Coordination by Amada Holdings Co. Ltd (Japan )
    © 2016. «iDigital3». All right reserved | Cookie|Information provided pursuant to (Art.13 – Reg.UE 2016/67– GDPR)