| FOR YOUR SUCCESS
  • Home
  • News
  • EG-AR: the fully automated bending system - Amada Engineering Europe

EG-AR: the fully automated bending system - Amada Engineering Europe

  • 28 September 2017

EG-AR_foto interna news

The tour inside AMADA Robot Technical Center continues!

After analyzing the HG-1003ARs, now we present the EG-6013AR, a new and multi-functional bending robot for higher accuracy and increased productivity.

Several features make this a standout machine set to revolutionize the bending industry: It uses a high speed, high accuracy servo press brake with the world’s first twin dual servo press (DSP) mechanism. The press brake is combined with a robot optimized for bending small parts with the same speed as human operators. Small parts that involve hazardous operations when handled manually can be thus bent safely and efficiently.

Four new technologies stick out from this solution:

1) INTELLIGENT PROCESSING
New AMNC 3i numerical control and dedicated CAM system that ensures efficient part processing with offline programming, automatic generation of robot motion and no requirements for manual teaching.

2) HIGH SPEED AND HIGHLY ACCURATE BENDING OF SMALL PARTS FROM A SMALL FOOTPRINT
Dedicated robot with a specific arm able to go inside the press brake and bend small parts which have been previously impossible to bend automatically and a new gripper equipped with both clamp and vacuum able to reduce the number of required robots from two to one.

3) IMPROVED PRODUCTIVITY AND ENVIROMENTAL IMPACT
New servo drive system (DSP) that foresee two motors able to achieve a maximum tonnage of 600kN and a 10% power reduction if compared with conventional high-end press brake.

4) HIGH SPEED AND SPACE SAVING BENDING
Both tool changing and workpiece handling are performed by a single robot achieving high speed bending from a compact footprint.

EG-AR_ENG_immagine news x testo

Click here to see the EG-AR video

AMADA team is always at your complete disposal, please contact your reference AMADA Sales Company to get further information.

We would be very glad to welcome you in the AMADA Robot Technical Center!

Don’t forget to follow us to discover the other solutions available inside RTC.

Click here to get further information about HG-1003ARs

All news
HEADQUARTERS:
Piacenza
  • Address: 1/3 Amada I.
    Pontenure (PC), 29010
  • Phone: +39 0523 952811
  • Fax: +39 0523 952899
 
Turin
  • Address: 15, Giovanni Agnelli
    Santena (TO), 10026
  • Phone: +39 011 7412749
  • Fax: +39 011 7412044
HOURS
  • Mon - Fri: 8.30 - 12.30
    13.30 - 17.30
  • Email: info@amada-engineering.eu



    Follow us:
    Amada Engineering Europe Srl | Company with Sole Shareholder | Registered office: 1/3 Amada I. - 29010 Pontenure (PC) | VAT n. 00844050336 | Reg. Impr. of Piacenza n. 00844050336 | REA n. 110682 Cap. Soc. i.v. Euro 905.000,00 |Company subject to Management and Coordination by Amada Holdings Co. Ltd (Japan )
    © 2016. «iDigital3». All right reserved | Cookie|Information provided pursuant to (Art.13 – Reg.UE 2016/67– GDPR)