| FOR YOUR SUCCESS
  • Home
  • News
  • AMADA Bending Automation solutions inside Robot Technical Center - Amada Engineering Europe

AMADA Bending Automation solutions inside Robot Technical Center - Amada Engineering Europe

  • 27 March 2017

HG-ARs_foto interna news

The Robot Technical Center, inaugurated in May 2015 in Santena, has been defined “the Excellence of Robotics in Europe” where, every day, innovation, technology and competences meld together to create solutions able to meet, as best, customer expectations.

But, which Bending automated solutions is possible to touch with hands inside AMADA RTC?

Let’s discover them starting with the HG-1003 ARs.

HG-1003 ARs is a medium-part automated bending system that grant a flexible, accurate and fully automatic production.
The HG-1003 ARs is based on the proven technology of AMADA’s cutting edge HG-ATC press-brake, utilizing an ECO hybrid drive system and an automatic tool changer for fast and accurate tool set-ups. Material load/unload and bending are all performed by a single 6 axes and 1 traval axis articulated robot which is capable of a complete range of motions.

The HG-ARs system can be bend complex shaped parts without multiple set-ups and run continuous production for extended periods of time.

HG-1003 ARs key features are:

FULLY AUTOMATED PERFORMANCE
– High speed bending using the new hybrid drive system;
– Automatic angle correction at any chosen position (Bi-S sensors);
– Delta-X function (new backgauge);
– Automatic set up of multi station bending layouts due to the automatic tool changer (ATC);
– Intuitive operation with the AMNC 3i control.

OFF-LINE PROGRAMMING
Dedicated CAM software that allows off-line programming and a fully simulations of the operation of the HG-1003 ARs. This eliminates manual teaching and enables the machines to operate continuously, thus improving bending productivity.

FLEXIBLE PART PRODUCTION
The Automatic gripper changer (AGC) can store a total of nine combinations-type, vacuum-type and mechanical type grippers. Repositioner allow the robot to regrip the parts for full range, automated bending.

BENDING ROBOT TECHNOLOGY
The 6 axes and 1 traval axis articulated robot performs all material loading, material handling during bending and unloading of formed parts.

HG-ARs_ENG_immagine news interna

During Euroblech 2016, AMADA exhibited the new solution HG-1003 ARs with the new Automatic Pallet Changer, AC300, studied to provide its customers with new innovative and automated solutions.

CLICK HERE TO GET FURTHER INFORMATION ABOUT AC 300

AMADA team is always at your complete disposal, please contact your reference AMADA Sales Company to get further information.
We would be very glad to welcome you in the AMADA Robot Technical Center!
Don’t forget to follow us to discover the other solutions available inside RTC.

All news
HEADQUARTERS:
Piacenza
  • Address: 1/3 Amada I.
    Pontenure (PC), 29010
  • Phone: +39 0523 952811
  • Fax: +39 0523 952899
 
Turin
  • Address: 15, Giovanni Agnelli
    Santena (TO), 10026
  • Phone: +39 011 7412749
  • Fax: +39 011 7412044
HOURS
  • Mon - Fri: 8.30 - 12.30
    13.30 - 17.30
  • Email: info@amada-engineering.eu



    Follow us:
    Amada Engineering Europe Srl | Company with Sole Shareholder | Registered office: 1/3 Amada I. - 29010 Pontenure (PC) | VAT n. 00844050336 | Reg. Impr. of Piacenza n. 00844050336 | REA n. 110682 Cap. Soc. i.v. Euro 905.000,00 |Company subject to Management and Coordination by Amada Holdings Co. Ltd (Japan )
    © 2016. «iDigital3». All right reserved | Cookie|Information provided pursuant to (Art.13 – Reg.UE 2016/67– GDPR)